RealClassic.co.uk Home

Bikes | Features | Events | Books | Tech | Magazine | About | Messages | Classified | Links

24th October 2008


Opinion: The Rise Of The Japanese Industry
Home -> Features -> Opinions and Columns ->

How did Japanís motorcycle industry come to inherit the market position which the British bike business once held? Steve Cooper of the VJMC makes some suggestions...

If you had to single out one attribute about Japanese machinery which really inspires owners it has to be the technology that made the manufacture of these bikes possible. The Japanese approached motorcycle manufacture with a totally open mind and had no preconceived notions of what was possible, impossible, conventional or simply down right plain weird.

When Japan was first opened to the mindsets and influences of rapidly mechanising world in the late 19th century by western countries the new government rapidly sought to modernise what was an essentially medieval country. To this end they sought the best from every possible industrialised nation and this approach was to remain the norm for some 50 years. With the advent of the internal combustion engine Britain took a lead and, as they say, the rest is history.

If you care to look at a 1920s or 30s Japanese motorcycle you will see startling influences from our own iconic machinery. Overhead cam motors redolent of a racing Velo, lusty pushrod singles strangely similar to a Matchless or AJS; everything was analysed, studied and in most cases copied; there are even pre-war versions of Harley-Davidsons. After WW2 the process was, to a fair degree, repeated with the odd foray into novel designs as a postwar society struggled for cheap and reliable transport. Reliability was the key word and this was what drove the relentless pace to evolve better and more dependable machinery.

Itís very possible that this was motivated by the Japanese psyche and the national concept of honour. It was a matter of personal pride for each and every worker that their company was the best; no matter that they were individually only a small cog in a vast machine, each worker knew that their personal effort was pivotal to company success.

Honda? They'll never amount to much... Jim Redman's Honda race bike

If you expand that on a national basis then you can see how it was possible for someone like Soichiro Honda to develop his company to a point where he felt he could take on the might of Europe; this wasnít arrogance, it was an innate faith in his own companyís product. OK he took a wee bit of a bloodied nose at his first TT but his return to the Island marked the beginning of the end for the European domination of the motorcycle industry.

Yamaha? What sort of a name is that?... Yamaha YDS1R

As soon as the other major Japanese players saw where Honda was going, corporately, they knew they had to be a part of this. Racing improves the breed, itís also pretty good at making your opposition sit up and take notice. With the lessons learned on the track and fed back into R&D it was a relatively easy step to transfer this knowledge back to the factory floor and improve on current designs.

Where European companies were following a tried-and-tested organic improvement process the Japanese companies were rewriting the rule book on an almost monthly basis. If perceived wisdom stated four-stroke combustion technology couldnít be improved above a certain compression ratio then the Japanese would investigate this and find out why. If there was a justifiable advantage to be had from a touch more compression they would adopt the science and apply it.

Likewise the same logic was applied to metallurgy, casting technology, sheet metal fabrication etc, etc. That said there were instances where plagiarism still played its part; the possibly shameful acquisition of MZís hard gained two-stroke technologies and knowledge remains a prime example.

Water-cooling? What's the point in that?... Suzuki GT750

Yet again this was fed back into basic road going machinery to produce two-strokes that totally redefined the concept of crankcase induction motors.

GT Suzukis on eBay

Bearing in mind that the earlier Japanese machinery was predominantly small end capacity wise perhaps the biggest revelation was the huge improvements in the bikesí electrical systems. Even the most ardent advocate of homespun machinery would have welcomed the reliable ignition and lighting system that the Japanese equipped even their most basic machines with. It was to prove to be one of the most pivotal technological achievements from the Oriental manufacturers and one that was to open doors to accomplishment that even Mr Honda had never thought possible.

Kawasaki? Looks like a BSA to me?... Kawasaki W1 650

-----------

The VJMC welcome anyone interested in classic, vintage or just plain old Japanese motorcycles. See www.vjmc.com


Home


Classic Hondas on eBay Right Now...

Home


Like what you see here? Then help to make RealClassic.co.uk even better

Back to the News menu...

Bikes | Features | Events | Books | Tech | Magazine | About | Messages | Classified | Links

RedLeg Interactive Media

© 2002/2007 The Cosmic Motorcycle Co. Ltd / Redleg Interactive Media

You may download pages from this site for your private use. No other reproduction, re-publication, re-transmission or other re-distribution of any part of this site in any medium is permitted except with the written consent of the copyright owner or in accordance with the provisions of the Copyright, Designs and Patents Act 1988.