RealClassic.co.uk Home


Bikes | Opinion | Events | News | Books | Tech | About | Messages | Classified | Directory

More Profiles...

Bike Profile


Ariel Square Four

The Square Four had a lifespan of over 25 years, and several incarnations of all sizes from 500cc to 1000cc. If you thought that all old British bikes were 650 twins then read on...

Ariel's Square Four started life in 1931, designed by a young Edward Turner who drew his original idea for the Square Four on the back of a fag packet, and then took it to several manufacturers. BSA weren't interested but Ariel were willing to try it out. Turner was hoping to 'provide a four-cylinder engine small enough for use in a solo motorcycle, yet producing ample power for really high performance without undue compression, racing cams or a big-choke carburettor. I was aiming at the ultimate reliability with the minimum of attention'

Girder forks, rigid frame. Ladder and barrel are optional extras.

When introduced, the Square was as 500, with its remarkably compact powerplant slotted into a twin front downtube chassis similar to that used by Ariel's 500 singles, using girder forks and a rigid back end. The original OHC engine can be viewed as being similar to two parallel twins which shared a common crankcase with the two crankshafts geared together at the middle pinions, and a common cylinder block and head. The overhead camgear was chain driven. Early bikes used a hand-change, four-speed Burman gearbox.

The Square grew to 600cc in 1932 to give it a little more power, and was intended to be used mainly as a sidecar tug. It was very smooth but somewhat sedate, and the engine was not easy to tune for peppier performance.

By the late 1930s the 997cc Square was introduced with an OHV pushrod, all-iron engine, alongside a similarly-engineered 600cc version. The front end still used girder forks but the rear utilised Frank Anstey's sprung rear suspension system.

Telescopic forks, smiling gnome behind rear wheel.

Postwar, the Square adopted an alloy engine, saving some 30lb in weight. The 1949 machine weighed around 435lb dry, produced 35bhp at 5500rpm and matched oil-damped tele forks to the Anstey link rear end.

In 1953 the most famous four-piper Mk2, still with Anstey link rear suspension, was introduced. Although Ariel built prototypes of a Mk3 with Earles forks in 1954, the model wasn't put into production, so the Mk2 ended the line when it was discontinued in 1959. The final factory incarnation of the Square cost 336.16.6 new in 1958. A non-running 1955 Mk2 4-piper was offered for private sale at the end of 2005 for 4000.

Ariel Info

  • THE ARIEL OWNERS' MCC welcome all Ariel enthusiasts, be they owners or simply admirers. See www.arielownersmcc.co.uk for details about the club's excellent monthly magazine, spare part scheme, badges, transfers and regalia, technical information, machine dating service, annual rally and concours competition and numerous other rallies and scenic runs. For membership info send an SAE to Andy Hemingway at 80 Pasture Lane, Clayton, Bradford BD14 6LN

  • DRAGANFLY MOTORCYCLES manufacture and stock a vast array of spare parts for Ariels made between 1926 and 1965. Roger and Graham have been specialising in the marque for over 20 years and offer a 130-page catalogue for 4-stroke models (available on cd or as a booklet, both for a fiver). See www.draganfly.co.uk or call 01986 894798

  • TO READ UP ON THE BREED we recommend Brooklands Books' Ariel Square Four Limited Edition Extra (ISBN 1 855 20623 4), and Mick Walker's Ariel The Complete Story (published by Crowood, ISBN 1 86126 645 6). There are some great older publications, too, but these are very much sought after and hardly ever cheap! See www.realclassic.co.uk/books to search Amazon's stocklist

  • JOHN BUDGEN'S STOCK OF ARIEL SPARES frequently turns up that magical NOS part which you thought you had no hope of finding, ever. John also has new items, like Ariel petrol tanks and Lycett-style saddles, made. See www.johnbudgenmotorcycles.co.uk or call 01242 621495

    1949; rear suspension!

    1958 Ariel Square Spec

  • Engine: Air cooled 4-stroke ohv square four
  • Displacement: 997cc
  • Bore x stroke: 65 x 75mm
  • Compression ratio: 7.2:1
  • Carburation: single SU carburettor
  • Claimed power: 42hp @ 5800rpm
  • Transmission: 4-speed
  • Electrics: 6V 20A/h battery, coil ignition
  • Frame: Steel diamond
  • Front suspension: Telescopic forks
  • Rear suspension: Twin link-and-plunger units
  • Front brake: 8-in (203mm) sls drum
  • Rear brake: 8-in (203mm) sls drum
  • Front tyre: 3.25 x 19in (Avon SM)
  • Rear tyre: 4.00 x 18in (Avon SM)
  • Wheelbase: 56 inches / 1422mm
  • Seat height: 30 inches / 787mm
  • Fuel capacity: 5 gallons / 23 litres
  • Weight: 425lb / 197kg dry

  • Random Ariel stuff on eBay.co.uk

    1957 four-pipe model

  • More Ariels on eBay.co.uk Right Now...

    Home


    Like what you see here? Then help to make RealClassic.co.uk even better


    Bikes | Opinion | Events | News | Books | Tech | About | Messages | Classified | Directory

    More Profiles...


    RedLeg Interactive Media

    2002 The Cosmic Motorcycle Co. Ltd / Redleg Interactive Media

    You may download pages from this site for your private use. No other reproduction, re-publication, re-transmission or other re-distribution of any part of this site in any medium is permitted except with the written consent of the copyright owner or in accordance with the provisions of the Copyright, Designs and Patents Act 1988.